Flexible Installation with Separate Solar Panel
Have the solar panel placed where sufficient sunlight is available, and set the flood lights in a dark place.
Convert Solar Power to Night Light
Charge under the sun in daytime, and shine bright like a diamond at night.
270° lighting range with 137 LED
120° detecting range with PIR motion sensor
High Conversion Rate
Efficient with up to 20% conversion rate
Features mono-crystalline silicon solar panel
IP65 waterproof & great heat resistance
Work well for lighting outsides
1. For the first time, the solar lights should be used after being charged for 8-10 hours under the sun.
2. The solar motion sensor light should be installed in places where sufficient sunshine is available.
3. To turn on the lights, you need to long press the button for 3 sec.
4. The ideal installation height is 2~3M, which helps the motion sensor detect better.
5. Please clean the solar panel in time when there is thick dusk or snow on it, which can block the solar panel and may affect the efficiency of light-electricity conversion.
6. With a built-in battery, the product should be kept away from fire.
Q1:Doesn’t turn on or work?
A1:You don’t turn on or start in a right way. Please cover to solar panel to imitate night conditions. At the same time, long press button 3s to turn on and it lights up. After turning on, if you uncover the solar panel, it lights off and only lights up in the night or dark environment.
Q2:Has been in full sun for several days and won’t light up?
A2:Please check whether you have turned on it in a right way. Refer to the Answer 1. It won’t turn on by wrong operation even being fully charged in the sun.
Q3:Worked great for a short time and then top working?
A3:Firstly,check if the solar power runs out or doesn’t get power in full sun. Secondly, check if the solar panel cable has a poor contact with the light. Third, put the solar light in full sun to charge. Most importantly, every time the solar power runs out, you should restart the solar lights after full charge. Refer to Answer 1 for the right way to turn on.
Q4:Don’t know the current mode?
A4:The mode is set fixed. After turning on, it is default Mode 1. Then every time you press the button, the light flashes quickly, entering next mode(Mode1-2-3-Off). We suggest that you should choose Mode 1 in daily life use.
【Ultra bright light】 The Matone solar security lights with the multi-side design & 137 super bright LED beads, produce 1200LM brightness output to light in a 270°wide range. Its PIR motion sensor has 120°detecting range, which detects motion from up to 16 feet away.
【Detachable Design – Two Installation Ways】  You can install the solar panel where there is more sunlight, while setting the lights in another place where need good illumination. There is a 3M extension cord to assist the separated installation.  Or you can simply use it as integrated-style installation without using the long cord. Just install the way you like.
【3 Intelligent Lighting modes】The 137 LED solar wall lights have 3 lighting modes:  [Security Light Mode] – lights only turns on for 15 sec when sensor detects motion nearby;  [Smart Brightness Mode] – Automatic dim lights in dark environment, only turns on 100% bright light for 15 sec when sensor detects motion nearby ;  [On All Night Mode] – Dim lights keep on all night, no matter whether there is motion detected.
【IP65 Waterproof & Heatproof】 Matone led motion sensor lights feature IP65 waterproof level & wonderful heat resistance. Even it is bad weather outside, the sturdy lights work great for lighting your front doors, yard, garage, patio, fence,barns, walls, etc.
【Long Lighting Time】This solar powered lights feature high conversion rate with its mono-crystalline silicon solar panel. High efficient with 18650 battery 1800mAh. When the lights get fully charged (8-12h under good sunlight ), security light mode can last 72 days, or smart brightness mode 19 hours, or on all night mode 20 hours (Measured as motion get detected 20 times one night).